Bole Kolner 1kg

Bole Kolner 1kg

Clay base for water gilding on wooden supports suitably prepared with clay (priming).

Bole Kolner 1kg


Choose the variants of Bole Kolner 1kg to request a quote

Bole Kolner 1kg Yellow
Bole Kolner 1kg Red


SKU: 3020 Category: Tag:


Clay paste mixture.

Use method

The support to be treated must be perfectly clean and smooth. As it does not contain glue an adhesive substance must be added to bole. It is thus advisable to dilute the product in a 1:1 ratio with a 90% water and 10% rabbit skin glue or fish glue solution. Once this mixture is blended it can be applied with a brush and the gold leaf applied when it is still wet. Once applied the product tends to dry in around two hours.


10 – 15 m² / kg.


Store in a cool, dry place in its own container, closed, and away from direct light and heat. The ideal temperature is 15-25°C with humidity under 50%.

Additional information

Dilution percentage, application method and quantities applied may significantly affect the workability time. The most suitable application methods should be determined by experimentation on the basis of the surface being gilded and the desired result.

PRODUCT ADDED TO THE QUOTE LIST Continue browsing Browse the list ×