Kölner Permacoll Size
Ready-to-use acrylic-based size, used for gilding on smooth and compact surfaces, interiors only.
It has a greater adhesive power than Instacoll, even if the final effect will be less bright. Particularly suitable for gilding with imitation metals.
TECHNICAL TABLE
|
Kölner Permacoll Size
Composition
Acrylic-based size.
Use method
Apply the base by brush or spray, after having diluted it if the product is too dense (with water max 15%). It is possible to start applying the leaf after a variable time between 15 and 60 min. according to the surface to be decorated and the environmental conditions. If there is a porous surface (e.g. wood, plaster, stucco or plaster), it is necessary to first apply a sealing primer on the surface. Particularly suitable is KÖLNER SEALER P, diluted with water up to a maximum of 50% depending on the porosity of the surface.
Yield
8-10 m² / litre (undiluted)
Storage
Store in a cool, dry place in its original container, away from direct sunlight and sources of heat. Ideal storage conditions are 15-25°C and lower than 50% humidity.
Additional information
Dilution percentage, application method and quantities applied may significantly affect the workability time. The most suitable application methods should be determined by experimentation on the basis of the surface being gilded and the desired result.
Products that may interest you
© 2023 GIUSTO MANETTI BATTILORO S.p.A. | P.Iva/VAT 00389280488 - Cookie preferences