Composition

Transparent water-dilutable two-component polyurethane varnish.

Use method

Before applying the product, the surface must be clean, dry, and free of grease and dust. On glossy or non-absorbent surfaces, it is necessary to roughen the surface beforehand. Mix the paint with the catalyst in the following proportions: 2 parts catalyst to 10 parts paint. The mixture can be diluted with up to 10% water and must be applied evenly within 1 hour. After this time, the mixture will begin to solidify and will no longer be usable. After at least 6 hours and no more than 24 hours, a second coat may be applied using the same method, but the dilution with water must not exceed 5%. If more than 24 hours have passed, sand the surface lightly and clean it before reapplying. The protected surface can be walked on 24 hours after the final coat. After 3 days, the product reaches approximately 80% of its mechanical resistance, and after 7 days, it achieves maximum performance.

Yield

10-14 m² / litre

Storage

Store in a well-ventilated area at temperatures below 20°C. Keep the container tightly closed and away from direct sources of light and heat.

Additional information

When applying with a brush, spread quickly and continuously without interruptions. Workability times depend on the application method, quantity, and substrate.