Composition

Oil and solvent based glue.

Use method

The support to be treated must be perfectly clean and degreased. Dilute the product 20-30% with turpentine and apply by brush in as thin layers as possible (recommended “Ambra” and “Perla” synthetic-hair brush series, p. 135).
Leaf can be applied 3 to 12 hours after application depending on format chosen. During drying protect the surface from dust.

Yield

10 – 12 m2 / litre

Storage

Store in a cool, dry place in its own container, closed, and away from direct light and heat.
The ideal temperature is 15-25°C with humidity under 50%.

Additional information

Dilution percentage, application method and quantities applied may significantly affect the workability time.
The most suitable application methods should be determined by experimentation on the basis of the surface being gilded and the desired result.