Composition

Yellow or transparent water-based varnish.

Use method

The surface to be decorated must be clean and completely dry. Apply the undiluted size with a brush in at least two coats. After about 10 minutes from the application of one coat, it is possible to apply another coat or start gilding. Make sure the layer of Stone size is completely dry before starting to gild or applying a further coat. On particularly absorbent surfaces, multiple coats of size may be applied in succession. Working with Stone size is simple and safe: even outdoor applications will be quick to carry out while maintaining high quality.
For application on large surfaces, it can be applied by spraying after dilution with distilled water up to a maximum of 8%. A low-pressure nozzle with a thickness of 1 / 1.5 mm is recommended.

Yield

8 – 10 m² / lt

Storage

Store in a cool, dry place in its original container, away from direct sunlight and sources of heat. Ideal storage conditions are 15-25°C and lower than 50% humidity.

Additional information

Dilution percentage, application method and quantities applied may significantly affect the workability time. The most suitable application methods should be determined by experimentation on the basis of the surface being gilded and the desired result