Composition

Water-dilutable, clear, single-component polyurethane varnish. Non-flammable product that can also be shipped via air transport.

Use method

Before applying the protection, the surface must be clean, dry, and free from grease and dust. The ready-to-use product should be mixed thoroughly and applied with a brush (synthetic bristle brush series squirrel hair and "Perla"), spray, or pad, avoiding excess and paying special attention to edges and corners. After approximately 4-6 hours, apply a second coat. The product will be fully dry after about twenty-four hours.

Yield

10 -14 m² / litre

Storage

Store in a cool, dry place, kept in its original container and away from direct light and heat sources. The ideal environment should have temperatures between 15 and 25 °C and relative humidity not exceeding 50%.

Additional information

The percentage of dilution, application method, and applied quantity can significantly affect working times. It is advisable to experimentally determine the most suitable application methods based on the substrates and the desired results.