How to prepare the ground for gilding with Ready gesso

A flawless water gilding starts with a perfect ground: did you know? In water gilding, the traditional technique in which the leaf is laid over gesso and bole, the surface must be smooth, even and of low porosity, so that the leaf does not take on its imperfections and does not tear.

Ready gesso makes this stage simpler: the traditional preparation based on rabbit skin glue and Bologna gesso comes ready to use and is applied directly to the surface, before the bole. In this tutorial we show you how to apply it, from the first coat to the final sanding.

You will need: Ready gesso, a synthetic hair brush (“Perla” or “Ambra“) and very fine abrasive paper.

Procedure

  1. Mix the product thoroughly before use.
  2. With the brush, apply as thin a coat of gesso as possible.
  3. Wait at least 3 hours, then sand the surface with very fine abrasive paper.
  4. Repeat up to a total of 2–4 coats, always thin, waiting at least 3 hours between one coat and the next.
  5. When the surface is smooth and even, it is ready for the next stages of gilding, starting with the bole.

Tips

  • For a perfectly smooth finish, we recommend using different abrasive papers, each progressively finer and lighter than the last.

Follow the video tutorial and let it guide you step by step. Is your ground ready? Share your progress on Instagram, tagging @giustomanettibattiloro: we can’t wait to see your next gilding project!

Made in Italy craftsmanship

Made in Italy craftsmanship

Certified and responsibly sourced gold

Certified and responsibly sourced gold

Worldwide shipping

Worldwide shipping

Customer support

Customer support

10% OFF
✨Subscribe to our newsletter and get an instant discount on your first purchase in our online shop!✨
10% OFF
10% OFF
✨Subscribe to our newsletter and get an instant discount on your first purchase in our online shop!✨