Use method

Once the leaf has been applied and any burnishing with an agate stone has been completed, the varnish can be applied evenly over the entire surface. The application transforms the silver or aluminium leaf into a finish with a characteristic warm amber-gold tone, enhancing its aesthetic appearance.If necessary, additional coats may be applied after the previous layer has fully dried, until the desired effect is achieved. Drying time ranges approximately from 1 to 4 hours, depending on the thickness of the application and environmental conditions.

Storage

Store in a cool, dry place in its own container, closed, and away from direct light and heat. The ideal temperature is 15-25°C with humidity under 50%.

Additional information

Dilution percentage, application method and quantity applied may significantly affect theworkability time.The most suitable application methods should be determined by experimentation on the basisof the surface being gilded and the desired result.